The lure of the fall is one of the important strategies in jigging. You can carefully explore the range with a natural fall that blends in with the tide, or invite a reaction bite with a speedy fall that is unquestionable. It is no exaggeration to say that an assembly that effectively produces a fall is an essential item in modern jigging. The fall lever is a mechanism that allows you to control the fall speed with one touch and freely by braking the rotation of the spool. This is an innovative mechanism that allows you to intentionally change the sinking speed by operating the lever, which was previously adjusted by devising the weight and shape of the jig or by the angler's thumbing, and is also expected to have high reproducibility. Its effect is not limited to adjusting the speed of the bite, but also allows you to change the sinking speed of the range you want to pass through and the range you want to invite to increase the efficiency of your attack, or use a strong brake to angle the line and pull the jig diagonally, allowing for flexible arrangements during a series of actions. The fall lever used in the 25 Grappler CT is a new type that does not make winding heavy even when the brake is applied. The fall lever supports jigging with greater strategy and reproducibility.

The new winding distance alarm on the Grappler CT is a new function that allows you to detect the winding distance without looking at the water depth display on the counter. Measurement begins from the moment you start winding after the lure hits the bottom. The alarm sounds up to three times at multiples of the set distance, so you can tell the winding distance by the sound without looking at the counter. For example, when set to 5m (A-5), a notification sound will sound three times every 5m from the bottom to 15m, informing the angler of the winding distance. This function allows you to make intuitive judgments by hearing the captain's instructions such as "There is a reaction at ○m from the bottom" and "Raise ○m when it hits the bottom" without looking at the counter. This is a new function that allows you to concentrate more than ever on the specified depth when winding from the bottom.

Winding Distance Alarm Setting

Winding Distance Alarm Setting

*The video is explained using Engetsu Premium.