cycling

Shimano Rowing

SUSTAIN FI

Sustain is packed with a long list of high-end features which translates to serious performance. From bass to small billfish, Sustain is built with the power and rigidity to handle a wide variety of fishing challenges while maintaining the refinement and light rotation that Sustain is known for. By combining our water-repellent coating and our specially designed, water channeling, labyrinth construction, X-Protect provides high-level water resistance without sacrificing light gear and rotor rotation. By utilizing the asymmetrical, super-light, perfectly balanced design of the new Magnumlite Rotor, the Sustain requires very low inertia to start rotating, resulting in an immediate, light, smooth feel.

Dealer Locator Manual

Product Locator by Locally

Product Technologies

Aero Wrap II This two-speed oscillation system layers the line onto the spool in a precise crisscross pattern that reduces line-to-line friction for longer casts. Reels with Aero Wrap II technology utilize a patented worm gear design to move the spool upward quickly and downward slowly to wind the line in a precise pattern, reducing friction and giving anglers smoother and longer casting ability.	CI4+ CI4+ is an advanced version of the original CI4. This highly technical material is 2.5 times stiffer than CI4 and is used to increase weight savings.	Cross Carbon Drag The Cross Carbon Drag material provides a wider range of drag settings compared to traditional drag materials. The Cross Carbon Drag provides the smoothest Shimano drag performance ever while providing anglers with increased durability.	G-Free Body G-Free Body technology has been developed to shift the reel's center of gravity closer to the rod. By moving the center of gravity closer to the angler’s hand, the G-Free Body helps to reduce fatigue and enhance casting comfort.	HAGANE Body The HAGANE Body is a metal reel body with high rigidity. The body rigidity and impact resistance virtually eliminates body flexing on the reel while fighting fish. The result transforms the angler's actions directly into cranking power, increasing efficiency through strength.
HAGANE Gear With amazing strength and durability, the HAGANE Gear is at the very heart of most Shimano reels. Shimano, through the application of state-of-the-art technologies, gives anglers the long-lasting smoothness and pleasure that is felt when anglers first use a reel, over and over again. No cutting work is applied to the teeth of the drive gear during fabrication, instead the entire surface is calculated in minute detail by special 3D-design and then formed by Shimano's cold-forging technology. The result is assured resilience. HAGANE Gear is the fruit of Shimano's inexhaustible pursuit for durability — the strength and power of forged metal continues to represent the fundamental concept of Shimano reels.	MGL Rotor The new design of the MagnumLite Rotor produces unprecedented light rotation. The rotor profile — which was previously symmetrical — is now asymmetrical, and the bail arm mechanism — previously situated on the same side as the line roller — has been moved to the opposite side. This ultimately improves the overall balance. Combined with a lightweight line roller, titanium bail and optimum arrangement of rotor thickness, the MGL rotor achieves a 14% reduction in rotational inertia to increase sensitivity to unprecedented levels. But the evolution of rotors is not limited to just reduced weight, the rotor rigidity on the line-roller side is an important performance factor as well. When compared to conventional models, the rigidity for the MGL Rotor is up to 30% higher and contributes to enhanced drag performance.	One-Piece Bail One-Piece Bail One-Piece Bail allows the line to travel unimpeded to the line roller. The seamless design reduces friction and decreases the chance of tangles or the line catching on the bail arm.	Propulsion Line Management System The most obvious component of the Propulsion Line Management System is the new Propulsion Spool Lip design. Through tens of thousands of casting tests and computer simulations, Shimano’s new spool lip design provides longer casting distances than a standard spool lip design while also preventing backlashes and wind knots from forming.	Rigid Support Drag By strengthening the spool support of the main shaft, the play and fluctuation of the spool during drag operation are suppressed. The Rigid Support Drag allows smooth and consistent drag delivery, even under high load.
S A-RB S A-RB bearings are put through the same process as Shimano’s A-RB bearings but feature shields on both sides of the bearings. These shields reduce the possibility of salt or sand inhibiting rotation of the bearing.	Water Resistant Drag Water Resistant Drag With the use of rubber gaskets the drag is sealed against intrusion of the elements such as water and dust.	X-Protect X-Protect provides high-level water resistance without sacrificing light gear and rotor rotation. By combining Shimano’s water-repellent coating with a water-channeling labyrinth construction, X-Protect provides added durability in tough conditions.	X-Ship X-Ship provides improved gear durability. By supporting the pinion gear on both ends with bearings, the pinion gear maintains precise alignment with the drive gear. This allows the gears to stay in the same position under the heaviest loads. The added benefit of X-Ship technology is that friction between the spool shaft and gear are eliminated. This further benefits anglers with enhanced casting performance and casting distance of lighter lures.

Filter by:

Item code	Mono Line Capacity (#Test/yd)	Weight (oz)	Bearings	Gear Ratio	Retrieve Per Crank (in)	PowerPro Braid (lb/yds)	Max Drag (lb)
Item code	Mono Line Capacity (#Test/yd)	Weight (oz)	Bearings	Gear Ratio	Retrieve Per Crank (in)	PowerPro Braid (lb/yds)	Max Drag (lb)
Item code SA2500HGFI Sustain 2500HG FI	Mono Line Capacity (#Test/yd) 6/200, 8/140, 10/120	Weight (oz) 8.3	Bearings 8+1	Gear Ratio 6.0:1	Retrieve Per Crank (in) 35	PowerPro Braid (lb/yds) 10/150, 15/145, 30/100	Max Drag (lb) 20
Item code SA4000XGFI Sustain 4000XG FI	Mono Line Capacity (#Test/yd) 8/240, 10/200, 12/160	Weight (oz) 10.1	Bearings 8+1	Gear Ratio 6.2:1	Retrieve Per Crank (in) 39	PowerPro Braid (lb/yds) 15/280, 30/170, 50/150	Max Drag (lb) 24
Item code SAC3000HGFI Sustain C3000HG FI	Mono Line Capacity (#Test/yd) 6/230, 8/170, 10/140	Weight (oz) 7.9	Bearings 8+1	Gear Ratio 6.0:1	Retrieve Per Crank (in) 35	PowerPro Braid (lb/yds) 10/200, 20/140, 40/105	Max Drag (lb) 20
Item code SAC5000XGFI Sustain C5000XG FI	Mono Line Capacity (#Test/yd) 10/240, 12/195, 14/165	Weight (oz) 10.1	Bearings 8+1	Gear Ratio 6.2:1	Retrieve Per Crank (in) 41	PowerPro Braid (lb/yds) 20/220, 30/200, 40/160	Max Drag (lb) 24

Asia

North America

EUROPE

Japan

China

South East Asia

New Zealand

Australia

US

L.A. Countries

Brasil

PowerPro